A Numerical Investigation on Microphysical Properties of Clouds and Precipitation over the Tibetan Plateau in Summer 2014     

Jie TANG  Xueliang GUO  Yi CHANG 《Journal of Meteorological Research》2019,(3):463-477

In order to improve our understanding of microphysical properties of clouds and precipitation over the Tibetan Plateau (TP), six cloud and precipitation processes with different intensities during the Third Tibetan Plateau Atmospheric Science Experiment (TIPEX-Ⅲ) from 3 July to 25 July 2014 in Naqu region of the TP are investigated by using the high-resolution mesoscale Weather Research and Forecasting (WRF) model. The results show unique properties of summertime clouds and precipitation processes over the TP. The initiation process of clouds is closely associated with strong solar radiative heating in the daytime, and summertime clouds and precipitation show an obvious diurnal variation. Generally, convective clouds would transform into stratiform clouds with an obvious bright band and often produce strong rainfall in midnight. The maximum cloud top can reach more than 15 km above sea level and the velocity of updraft ranges from 10 to 40 m s-1. The simulations show high amount of supercooled water content primarily located between 0 and -20℃ layer in all the six cases. Ice crystals mainly form above the level of -20℃ and even appear above the level of -40℃ within strong convective clouds. Rainwater mostly appears below the melting layer, indicating that its formation mainly depends on the melting process of precipitable ice particles. Snow and graupel particles have the characteristics of high content and deep vertical distribution, showing that the ice phase process is very active in the development of clouds and precipitation. The conversion and formation of hydrometeors and precipitation over the plateau exhibit obvious characteristics. Surface precipitation is mainly formed by the melting of graupel particles. Although the warm cloud microphysical process has less direct contribution to the formation of surface precipitation, it is important for the formation of supercooled raindrops, which are essential for the formation of graupel embryos through heterogeneous freezing process. The growth of graupel particles mainly relies on the riming process with supercooled cloud water and aggregation of snow particles.  相似文献   

RCCC-WBM水量平衡模型在北方典型流域的适用性研究   总被引：1，自引：0，他引：1       下载免费PDF全文

赵建华  王国庆  张建云  贺瑞敏  万思成 《水文》2018,38(2):25-29

流域水文模型是开展环境变化影响分析和水资源评价的重要工具。以山西省的5个不同尺度的代表性流域为研究对象,分析了RCCC-WBM模型在山西省的区域适用性。结果表明:RCCC-WBM模型能够较好地模拟出山西省径流年内分配特征和年代际变化特点,对典型流域月径流量模拟的Nash-Sutcliffe模型效率系数超过65%,水量模拟误差也较小,该模型在山西省具有较好的适用性,可以用于山西省水资源评价等方面的科学研究。  相似文献   

水射流破碎南海含水合物沉积物数值模拟研究          下载免费PDF全文

潘栋彬  陈晨  杨林  靳成才  李曦桐  刘书源  陈勇  朱江 《探矿工程》2018,45(10):27-31

为研究高压水射流切割、破碎南海天然气水合物储层的过程,采用著名的LS—DYNA显示动力分析有限元程序,对淹没状态下,水射流破碎海底含水合物沉积物过程进行数值模拟研究,研究了不同射流速度对高压水射流作用下含水合物沉积物破碎效果的影响规律。随着射流速度的增大,冲蚀深度逐渐增大,两者呈线性递增关系。含水合物沉积物冲蚀体积是轴向冲蚀与径向冲蚀共同作用的结果,射流速度越大,对含水合物沉积物的轴向与径向冲蚀作用增强,加大了含水合物沉积物冲蚀体积递增速率。  相似文献   

Comparative Study of Hydrogen and Carbon Isotopic Composition of Gases Generated from the Pyrolysis of a Peat under Saltwater and Freshwater Conditions     

WU Yingzhong  DUAN Yi  ZHAO Yang  CAO Xixi  MA Lanhu  QIAN Yaorong  LI Zhongping  XING Lantian 《《地质学报》英文版》2018,92(5):1879-1887

To understand the influence of the diagenetic water medium on the isotopic compositions of thermogenic coalbed gas, both hydrous and anhydrous closed-system pyrolyses were performed at temperatures of 250°C to 650°C on an herbaceous marsh peat. Compared to the results of anhydrous pyrolysis, the hydrocarbon gases generated from hydrous pyrolyses have very different hydrogen isotopic compositions. However, the carbon isotopic compositions of the hydrocarbon gases became only slightly heavier in hydrous pyrolysis, compared to that from anhydrous pyrolysis. With the progress of thermal evolution from peat to a more advanced thermal maturity of vitrinite reflectance values (Ro) of 5.5% during the pyrolysis, the difference in the average δD value increased from 52‰ to 64‰ between the hydrous pyrolysis with saltwater and anhydrous pyrolysis and increased from 18‰ to 29‰ between the hydrous pyrolysis with freshwater and anhydrous pyrolysis, respectively. The difference in the average δ13C value was only 1‰–2‰ between the hydrous and anhydrous pyrolysis. The relationships between the δD values of the generated hydrocarbon gases and Ro values as well as among δD values of the hydrocarbon gas species are established. The close relationships among these parameters suggest that the water medium had a significant effect on the hydrogen isotopic composition and a minimal effect on the carbon isotopic composition of the hydrocarbon gases. The results of these pyrolyses may provide information for the understanding of the genesis of coalbed gas from herbaceous marsh material with the participation of different diagenetic water media.  相似文献   

极地深部冰层取心钻探孔壁水压致裂研究          下载免费PDF全文

张晗  陈晨  Pavel Talalay  毛建设  刘书源  靳成才  宛召 《探矿工程》2018,45(11):5-11

为了维护极地深部冰层取心钻探工作中钻孔的稳定,避免孔内事故的发生,冰层孔壁的水压致裂问题是亟待解决的重要科学问题之一。本文在深入分析国内外冰层钻探资料的基础上,结合冰盖动力学相关理论,计算得出了钻孔所在区域冰层的密度、温度及内部应力随深度的变化规律。在此基础上,结合油气资源勘探水力压裂技术与冰层钻进钻井液等相关理论,建立了合理的孔壁压差计算方法,深入探讨了适用于深部冰层钻探孔壁水压致裂机理。研制了冰层钻孔水压致裂模拟实验装置,可分析研究不同围压条件下冰样的脆性变形机理。结合我国Dome A深冰心钻探工程实际,提出钻孔可能发生水压致裂的深度区域及孔壁所需的起始裂纹长度判定,以期为后续的安全高效冰层钻进提供重要的理论依据。  相似文献   

甘孜州色达县典型牵引式滑坡地质灾害形成机理分析--以甘孜州甲学乡甲热滑坡为例          下载免费PDF全文

罗雲丰  魏良帅 《探矿工程》2018,45(8):93-97

甲热滑坡位于甘孜州色达县甲学乡境内,属于典型的牵引式滑坡,滑坡体平均坡度约35°,主要由碎石土组成,滑坡长约195 m,宽约280 m,平均厚约15 m,滑坡体总方量约60万m3,属中型滑坡。滑坡坡体中上部变形现象较明显,若发生滑动,将直接威胁当地41户160人居民的生命财产安全。本文在进行野外现场基础地质调查后,对滑坡体的变形破坏机制进行了定性分析,并利用三位有限元数值模拟进行了定量分析,对以后研究同类滑坡的稳定性具有重要意义。  相似文献   

处置单元核素¹³⁵Cs迁移数值模拟研究     

彭志娟  李寻  陈经明  周泽超 《地下水》2018,(6):113-116

根据高放废物地质处置库概念设计,以北山花岗岩为参考岩性,内蒙古高庙子膨润土为参考缓冲材料,使用数值模拟软件tough2对放射性核素¹³⁵Cs在处置单元及其围岩中的迁移行为进行了数值模拟研究,考虑放射性核素衰变释热对核素迁移的影响。研究表明:膨润土对核素具有较强的滞留作用,模拟200000年后核素在花岗岩中迁移了1 m左右,且峰值为10-6个数量级;前10 a模型的温度变化最剧烈且温差最大,10 a后模型整体温度开始降低,2 000 a后整体温度接近于初始温度;温度的变化会引起核素迁移速率的改变,但总体温度对核素迁移的影响不大。  相似文献   

Visual MODFLOW在煤矿建设地下水环境影响评价中的应用 ——以甘肃省灵台县安家庄煤矿为例          下载免费PDF全文

张峰  尹政  何剑波  张玲 《甘肃地质》2018,(1):70-78

结合甘肃省灵台县安家庄煤矿地下水环境影响评价实例,建立了评价区水文地质概念模型,并基于Visual MODFLOW对评价区地下水进行了数值模拟计算和验证;预报了设计开采条件下研究区不同含水层的地下水水位。预报结果表明:矿坑排水使得煤层所在含水层出现疏干现象,并且疏干范围随着开采范围的增加而不断扩大;在煤矿开采作用下,随着模拟时间的延续,煤系层上覆白垩系洛河组—宜君组含水层地下水位降落漏斗的范围及地下水位下降幅度不断增大,但降落漏斗的范围基本上不超过采空区范围;煤矿开采对白垩系环河组含水层无影响,至矿区开采期结束,未引起含水层水位下降;对上部孔隙、裂隙潜水含水层也无影响,至矿区开采期结束未引起含水层水位下降。  相似文献   

基于多源数据约束的成矿动力学模拟——以宁芜盆地钟姑矿田典型矿床为例   总被引：1，自引：0，他引：1       下载免费PDF全文

贾 蔡 袁 峰李晓晖  胡训宇廖宝胜孙维安  张明明沈 乐 《地质科学》2018,(4):1327-1346

数据驱动是大数据分析的特点之一。成矿过程的数值模拟即采用数据驱动方式,在基本的物理化学方程及地质模型基础上,通过定量的手段,模拟不同阶段、不同条件下成矿系统的演化过程,从而能够更深入、直观的讨论各种地质要素对成矿系统的影响,验证已有的成矿理论,获得新的认识。姑山铁矿床和杨庄铁矿床是宁芜火山岩盆地钟姑矿田内的典型矿床。前人研究显示,杨庄铁矿床为典型的充填-接触交代型热液矿床,而姑山铁矿床目前在成因上仍存在争议,存在岩浆成因和热液成因等多种观点。为了更好的对比和了解姑山铁矿床和杨庄铁矿床的成因及成矿过程,本文基于多源数据的综合解译剖面,采用力-热耦合数值模拟方法对与热液矿床密切相关的扩容空间的形成机制和特点开展研究。模拟结果显示,姑山铁矿床和杨庄铁矿床可能分属不同的成因类型;随着岩体的逐渐冷却,杨庄铁矿床内岩体和地层接触带会出现明显的扩容空间,可为成矿流体的汇聚及矿质的沉淀提供良好的条件,有利于热液矿床的形成;而姑山铁矿床内岩体和地层接触带只有局部区域出现扩容空间,同时体应变数值较小且形态变化大,并不利于大规模的流体汇聚及矿质的沉淀,姑山铁矿床可能主要为岩浆成因,并受少量热液的叠加改造。  相似文献   

基于GIPL2模型的青藏高原活动层土壤热状况模拟研究   总被引：5，自引：5，他引：0  

秦艳慧  吴通华  李韧  胡国杰  乔永平  朱小凡  杨淑华  余文君  王蔚华 《冰川冻土》2018,40(6):1153-1166

青藏高原活动层土壤热状况,对深入了解高原活动层的厚度变化特征、下垫面的热力作用以及对气候变化预测均有重要意义。利用GIPL2模型模拟青藏高原多年冻土区不同植被状况下活动层土壤热状况。模拟结果表明：模型在高寒草原（QT06）试验点模拟效果较好,高寒沼泽草甸（QT03）试验点的模拟效果较差,高寒草甸（QT01）、高寒荒漠草原（QT05）和高寒草原化草甸（QT04）试验点的模拟效果介于高寒草原试验点和高寒沼泽草甸试验点之间。QT01、QT03、QT04、QT05和QT06的土壤温度模拟值与观测值相比,均方根误差分别为0.67、1.29、0.73、0.7和0.56℃;相关系数分别为0.99、0.87、0.98、0.98和0.96;平均误差分别为0.37、0.61、0.31、0.45和0.16℃。QT06模拟结果较好,原因在于此点土壤质地变化不大,模型的分层与所取的参数更加接近此点的实际状况。QT03模拟结果较差,可能由于此地区土壤中存在砾石,在导热率参数化方案中没有考虑砾石含量,导致模拟结果偏差较大。总体而言,GIPL2模型对青藏高原活动层土壤热状况的模拟具有一定的优势,是一种模拟多年冻土区活动层土壤热状况较为理想的模型。  相似文献